NETGEAR WG302v2 Reference Manual page 100

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
Table C-16 Advanced Wireless Settings (continued)
Task
Set the DTIM Interval
Enable Wi-Fi Multimedia
(WMM)
Disable Wi-Fi Multimedia
(WMM)
View QoS queue parameters
AP EDCA parameters
Set AIFS on AP-to-station
traffic
on
Set cwMin and cwMax
AP-to-station traffic
on
Set Max. Burst
AP-to-station traffic
Station EDCA parameters
Set AIFS on station-to-AP
traffic
on
Set cwMin and cwMax
station-to-AP traffic
on
Set TXOP Limit
station-to-AP traffic
C-18
Command
set bss wlan0bssvap0 dtim-period <1-255>
set radio wlan0 wme on
set radio wlan0 wme off
get tx-queue
set tx-queue wlan0 with queue <Queue_Name> to
aifs <AIFS_Value>
Example:
set tx-queue wlan0 with queue data0 to aifs 13
set tx-queue wlan0 with queue <Queue_Name> to
cwmin <cwmin_Value> cwmax <cwmax_Value>
Example:
set tx-queue wlan0 with queue data1 cwmin 15
cwmax 31
set tx-queue wlan0 with queue <Queue_Name> to
burst <burst_Value>
Example:
set tx-queue wlan0 with queue data2 to burst 0.5
set wme-queue wlan0 with queue <Queue_Name>
to aifs <AIFS_Value>
Example:
set wme-queue wlan0 with queue vo to aifs 14
set wme-queue wlan0 with queue <Queue_Name>
to cwmin <cwmin_Value> cwmax <cwmax_Value>
Example:
set wme-queue wlan0 with queue vi cwmin 7 cwmax 15
set wme-queue wlan0 with queue <Queue_Name>
to txop-limit <txop-limit_Value>
Example:
set wme-queue wlan0 with queue vo to
txop-limit 49
v1.0, May 2006
Command Line Reference