Controls And Connectors - PURE Evoke-1 Owner's Manual

Controls and Connectors

DAB/FM – press to switch between DAB and FM radio.
Standby - press to switch between standby mode and power on
Timer - press and use the Tune knob to set a countdown timer which will
sound an alarm after the period you set (from 1 min to 23 hrs 59 mins)
Info - press and repeat to change the text shown on the bottom of the
display e.g. scrolling text or time and date.
Menu - press to access and exit setup menu options, turn the Tune knob to
scroll through and push to select an option.
Presets (1-6) - press and hold for around two seconds to store a station
under that number. Press and release to select and listen to a preset. (up to
6 FM and 6 DAB presets) DAB presets show the preset number next to the
station name.
Tune - turn to scroll through and press to select stations and menu options.
Push to see signal strength.
USB - connect to a PC for software upgrades
Stereo Out - analogue output - connect to an external amplifier or recorder
Headphones - connect to headphones (mutes speaker)
Aux Speaker - connect to an optional XT-1 speaker for full stereo output
9V DC - connect to mains adapter
Aerial - F-type connector for the supplied telescopic or other aerial.
Connecting an external aerial may improve DAB Band III or FM reception.
1