Setting Up Wpa2-Psk Security - NETGEAR WG111V2 User Manual

4. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b wireless devices.
5. Save your settings in a Profile.
a. Click Save Profile. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.
1. Run the Wireless Adapter Smart Wizard.
a. Make sure the software is installed and the Wireless Adapter is fully inserted in a USB
port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 20
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual
v3.0, January 2007
23