Icon Colors; Placing The Usb Adapter Cradle - NETGEAR WG111V2 User Manual

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual
Figure 9
If you selected Europe during the WG111v2 installation, you will not see the "Enable Internet
Connected Notification" option.

Icon Colors

The icon is on the desktop and in the Windows System Tray. The System Tray resides on one end
of the taskbar in the Microsoft Windows desktop.
Color Condition
Red The wireless USB adapter
has no connection to any
other wireless node.
Yellow The wireless USB adapter
has a connection with another
wireless node.
Green The wireless USB adapter
has a connection with another
wireless node.

Placing the USB Adapter Cradle

You can attach the Wireless Adapter directly to a USB port on your computer, or use the USB
cable to extend the range and obtain better wireless reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided
in the package for better USB Adapter placement on a notebook computer:
1. The Wireless Adapter comes with three black fasteners. Locate the one that has a prickly side
and attach it to the plastic cradle on the middle of the outside rear.
2. Insert the Wireless Adapter in the plastic cradle.
8
Description
The Wireless Adapter can not link to any other wireless node
or the link is lost. Check your configuration or try moving to a
location where the wireless signal quality is better.
The wireless link is weak. You may need to move to a better
spot, such as closer to the wireless access point. Also, look
for possible interference such as a 2.4 GHz cordless phone or
large metal surface.
The wireless USB adapter has established good
communication with an access point and the signal quality is
strong.
v3.0, January 2007