Charge The Battery - Philips xenium x806 User Manual

4. As shown, align the metallic connectors on
the battery and battery slot. Press the
battery down until it is locked.
5. As shown, slide the back cover along the
slots until it is locked.
14
Remove the protective film covering the screen
and camera lens before using the phone.

Charge the battery

Your phone is powered by a rechargeable
battery. A new battery is partially charged. The
battery symbol indicates the state of the battery.
To charge the battery, plug in the connector as
shown below. Then plug the other end into a
power socket.
During charging, the battery symbol scrolls.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
Getting Started