NETGEAR WG102 ProSafe Wireless Access Point WG102 WG102 User Manual page 21

If the Power LED still does not come on, and you have confirmed the power outlet is live, you
have a hardware problem and should contact technical support.
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
• Make sure that power is being provided to more than one PowerLine device. Another
PowerLine device must be installed for successful communication across the PowerLine.
• Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
• Make sure that the Ethernet cable is plugged in properly to a router LAN port.
• On the attached Ethernet device or network adapter card, check that the Link light is on.
XEPS103 Space-Saving Powerline Network Extender User Guide
v1.0, February 2007
13