NETGEAR WG102 ProSafe Wireless Access Point WG102 WG102 User Manual page 18

XEPS103 Space-Saving Powerline Network Extender User Guide
f. Enter the password recorded from the label on the back of the selected PowerLine device.
g. Click OK.
h. Repeat this step for all devices that you want attached to your network.
2. Set the network password.
a. Select the Security tab.
Figure 1-7
b. Type a password in the Private Network Password text box.
c. Click Set All Devices. A pop-up window indicates that the operation was successful.
10
v1.0, February 2007