Table of Contents
Advertisement
Introduction
If there is mechanical damage or defect, or if the TT-3005M
Capsat Antenna does not work properly, notify your dealer.
After you unpack the TT-3005M Capsat Antenna, inspect it
thoroughly for hidden damage and loose components or fittings.
1.2
Storage
The TT-3005M may be stored or shipped in temperatures within
the limit -40° C to 80° C. It is advisable to protect the TT-3005M
from extreme temperature variation, which can cause excessive
condensation. It is recommended that the TT-3005M is unpacked
immediately on delivery.
1.3
Repackaging for shipment
The shipping carton for the TT-3005M has been carefully
designed to protect the antenna during shipment. This carton and
its
associated
packing
repackaging for shipment. Attach a tag indicating the type of
service required, return address, model number and full serial
number. Mark the carton FRAGILE to ensure careful handling.
If the original shipping carton is not available, the following
general instructions should be used for repackaging with
commercially available material.
1. Wrap the TT-3005M in heavy paper or plastic. Attach a tag
indicating the type of service required, return address, serial
number and model number.
2. Use a strong shipping container, e.g. a double walled carton
of 160 kg test material.
3. Insert a 7 cm to 10 cm layer of shock absorbing material
between all surfaces of the equipment and the sides of the
container.
Page 1-2
Storage
material
should
be
used
when
16Aug06
Advertisement
Table of Contents
