Setting Up Wpa2-Psk Security - NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 WPN111NA WPN111NA User Manual

NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase. For more
information about WPA-PSK, see the link to
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the Smart Wizard.

Setting up WPA2-PSK Security

Follow these steps to configure WPA2-PSK Security:
1. Run the WN111 Smart Wizard.
a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port
in your computer.
b. Use the icon to open the Smart Wizard. The Settings screen displays:
Figure 2-23
matches exactly what is configured in the access point.
v1.0, December 2007
"Wireless Communications:" in Appendix B.
2-21