Using The Address Book In Smart Mode - Hitachi w42h User Manual

Using the Address
Book in Smart Mode
Example: To view a record in address book
While the standby screen is
displayed, press & , and
then press 1 (Look).
Use a to select the address
book record you want to view,
and then press c (Select).
Press 3 (Read Data).
The address book record appears.
Use j to select the phone number,
and then press c (Call).
To send an e-mail message, use j to
select the e-mail address, and then
press c (E-Mail). This will display the
e-mail composition screen.
1(Call): Dials the number of the selected record.
2(Send Mail): Selects to compose an e-mail message and send it to the
address of the selected record.
To create an e-mail message
→ Perform the procedure starting from step 3 under "Creating and Sending
E-mail Messages in Smart Mode" (page 95).
4(Delete Data): Deletes the selected address book record.
5(Edit Data): Selects to edit the selected address book record.
6(Send via Ir): Sends the selected address book record via infrared.
94