Hitachi w42h User Manual page 109

Press 1 (ON/OFF
Setup), and then press
1 (ON).
Press 2 (Specified
Time), input the period
you want to specify, and
then press c (OK).
You can set the time period (the time
intervals from the first call to the last call
you should make to activate Remote Auto
Lock).
You can set the time period between 1 to 10 minutes.
Press 3 (Num of
Incoming), input the number
of calls you want to specify,
and then press c (OK).
You can set how many times you
should repeat making a call to activate
Remote Auto Lock.
You can set it from 3 to 10 calls.
■ Setting Auto Lock and FeliCa Lock on
Make a call to your W42H from the registered phone number
within the period of time which has been specified in
"Configuring Remote Auto Lock Settings" (page 106).
After repeating a call (3 to 10 calls you have specified), Remote Auto Lock
turns active, and you hear an announcement letting you know Auto Lock and
FeliCa Lock has been set.
After Remote Auto Lock turns active, your W42H is automatically turned off,
and turned on again.
Remote Auto Lock cannot be activated while your W42H is turned off or
◎
outside of the service area.
◎ When you purchase the W42H, its initial default "Erase Data" setting is
"Not Erase," and its initial default "Rel Phone Lock" setting is "Valid."
107