Curve Setting 曲線設定 - THUNDER TIGER Raptor E300 md Instruction Manual

CURVE SETTING／曲線設定
The following is the setting up data of pitch curve and throttle curve for your reference only. Please ask experienced
pilot to help you if you have never done this before.
下列參數設定僅供參考，請依實際狀況進行調整，或詢求有經驗的玩家協助。
■ Beginner / 一般飛行
Throttle Curve 油門曲線
Thro.
油門
100
75
50
25
0 25 50 75
◎ Normal / 一般飛行
■ 3D
Throttle Curve 油門曲線
Thro.
油門
100
75
50
25
0 25 50 75
◎ Idle-up 1 / 特技模式 1
CAUTION / 警告
1. Too much collective pitch will bring about too much loading to the motor and drive system.
2. Too much headspeed will lead to blades (grips) explosion.
3. It's very dangerous for setting the headspeed over the blades (grips) limit.
4. Please do not set the collective pitch to the maximam (±15) unless you have very good collective pitch management skill.
1. 過大的聚合螺距設定會使電機及傳動系統超載。
2. 過快的主旋翼轉速會造成主旋翼轉座崩裂或射槳。
3. 將旋翼轉速設定超過槳片負載極限極端危險！
4. 請勿將聚合螺距設定超過最大值（+15度角）。
Pitch Curve 螺距曲線
Pitch
螺距
100
75
50
25
100 Stick 0 25
撥桿
Pitch Curve 螺距曲線
Pitch
螺距
100
75
50
25
0 25 50
100 Stick
撥桿
Pitch
螺距
100
75
25
0 25 50
◎ Hold / 鎖定模式
Throttle Curve 油門曲線
Normal 一般飛行
Pitch Curve 螺距曲線
Normal 一般飛行
50 75 100 Stick
撥桿
Throttle Curve 油門曲線
Idle-up 1 特技模式 1
Pitch Curve 螺距曲線
Idle-up 1 特技模式 1
Hold 鎖定模式
75 100 Stick
撥桿
Stick
75 100
撥桿
-12-
0 25 50 75 100
0 35 45 52 100
0 25 50 75 100
25 - 55 - 82
0 25 50 75 100
80 - 60 - 80
0 25 50 75 100
0 - - - 100
0 - - - 100