Belkin F5U222 User Manual page 20

Installation
The "Universal Serial Bus Controllers" list will now include two "NEC USB
Open Host Controller" entries, two additional "USB Root Hub" entries, one
"Standard Universal PCI to USB Host Controller" entry, and one "USB 2.0 Root
Hub Device" entry.
Note: If your computer features built-in USB ports, or if you have other USB
PCI controller cards installed, you will see additional USB controller and root
hub entries in the Device Manager list.
EN
Installing the Belkin Driver
Note: Do not insert the Notebook Card into your computer until instructed to
do so.
1. Insert the F5U222 installation CD into your CD-ROM drive. After a few
moments the main menu will automatically start.
2. Select "Install USB 2.0 Driver".
3. After the driver is installed, select "Yes, I want to restart my computer
now." Click "Close".
4. After Windows restarts, locate your laptop computer's CardBus slot.
5. Insert the Notebook Card into the slot. Apply pressure as needed until it is
fully seated.
Note: Do not plug any devices into the Notebook Card until driver installation is
completely finished.
Note: Depending on the speed of your computer, it may take up to 30-60
seconds for the Notebook Card to be detected.
16 16