Table of Contents
Advertisement
Configuring the Router (continued)
Static IP Connections
Static IP is used to set the Static IP mode for the Router. Static IP is used whenever a known
static IP address is assigned. The accompanying information such as the Subnet mask and
the gateway should also be specified in order to be able to connect. These are the servers
would enable you to have access to other web servers. Information entered here must come
from your ISP. You may change the PVC (Permanent Virtual Channel) settings and the
Encapsulation.
If you have
been told to
change the
VPI
or
VCI
number,
Type
the new
values.
Select
the
Connection Type
1483 Bridged IP
Bridged IP VC-Mux, 1483 Routed
IP LLC, 1483 Routed IP VC-Mux
or
IPoA,
as instructed by your ISP.
as
LLC,
1483
Click
12
Type
Address,
ISP Gateway Address,
Primary DNS Address
and/or
Address, as instructed
the
Next
button. Skip ahead to the Setup
Completed menu below.
the IP addresses
for the
WAN IP
Subnet
Mask,
Secondary DNS
by your ISP.
Advertisement
Table of Contents
