Huawei quidway WA1003A Quick Installation Manual page 5

Description of buttons/ports in rear panel as below (From left to
right):
Buttons/Ports
12V/AC 1.2A,
12V/DC1.25A:
Reset
Power
Ethernet
USB
ADSL
Antenna:
Huawei Technologies Proprietary
Figure1 Rear panel
The port for AC power adapter.
The WA1003A may be reset to the original
factory default settings if you press the
reset button for a few seconds while the
device is powered on.
Press the button after the power adapter is
connected correctly to power on the device.
You can establish one Ethernet
connections by using Ethernet port.
If your computer has an available USB port,
you can connect WA1003A to this USB port
through a USB cable.
Plug one end of the cable into the ADSL
port (RJ-11 receptacle) on the rear panel of
WA1003A and insert the other end into the
RJ-11 wall socket.
Screw-on antenna, for 802.11b/g wireless
connection.
2
Description