Removal Of The Tray Motor P.c.b. And Sensor; Removal Of The Cd Traverse Unit; Removal Of The Pulley Gear - Panasonic SA-HT720GCP Service Manual

Step 3 Rotate close lock gear to direction of arrow, press claw
(b) and pull out close lock gear.
11.8. Removal of the Tray Motor
P.C.B. and Sensor P.C.B.
· Follow the (Step 1) - (Step 2) of Item 11.1.
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Remove 2 screws.
Step 2 Release 4 claws at Tray Motor P.C.B. and Sensor
P.C.B.
11.9. Removal of the CD Traverse
Unit
· Follow the (Step 1) - (Step 2) of Item 11.1.
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Rotate cam gear anti-clockwise. (Align at position (A) as
marking on gear with arrow)
Step 2 Flip the base mecha unit in vertical position.
Step 3 Press upward (a), push backward (b) and press to left
(c) to release CD traverse unit.

11.10. Removal of the Pulley Gear

· Follow the (Step 1) - (Step 2) of Item 11.1.
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Remove of the loading belt.
Step 2 Flip the base mecha.
17
SA-HT720GCP