D-Link DI-524UP Quick Instruction Manual page 3

Restart Your Computer
Connecting Additional Computers
To The DI-524UP
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-524UP.
Status LED – a blinking light
indicates that the DI-524UP
is functioning properly.
Power LED – a solid
light indicates a proper
connection to the power
supply.
LOCAL NETWORK LEDs – a
solid light on the port indicates
a connection to an Ethernet
enabled computer on ports 1-4.
This LED blinks during data
transmission.
3
WAN LED – a solid light
indicates connection
on the WAN port. This
LED blinks during data
transmission.