Specifications; Intended Use - Makita LS711D Instruction Manual

SPECIFICATIONS

Blade diameter : ............................................................................................. 180 - 190 mm
Hole (arbor) diameter : .............................................................................................. 20 mm
Max. Miter angle : ....................................................................................Left 47°, Right 57°
Max. Bevel angle : ....................................................................................................Left 45°
Max. Cutting capacities (H x W) with blade 190 mm in daiameter.
Miter angle
0°
45° (left and right)
(Note)
The max. Cutting capacities may vary according to workpiece, blade and/or charging condition.
No load speed : ..................................................................................................2,000 min.
Dimensions (L x W x H) : ...................................................... 550 mm x 430 mm x 454 mm
Net weight : ............................................................................................................... 10.5 kg
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.

Intended use

The tool is intended for accurate straight and miter cutting in wood.
SYMBOLS
The following show the symbols used for the tool. Be sure that you understand their mean-
ing before use.
................. Indoor use only
................ Read instruction manual.
.................. DOUBLE INSULATION
.......... Ready to charge
............. Charging
2
Bevel angle
0°
50 mm x 182 mm
50 mm x 127 mm
.............Charging complete
......................Delay charge (too hot battery)
45° (left)
35 mm x 182 mm
35 mm x 127 mm
.........Deffective battery
-1
END303-1