Special Functions - LG wm2016cw Service Manual

Hide thumbs Also See for wm2016cw:
Table of Contents

Advertisement

5-3. SPECIAL FUNCTIONS

The option buttons also activate special functions, including CHILD LOCK, TUB CLEAN, and SPIN SENSE.
CHILD LOCK
Use this option to prevent unwanted use of the washer or to keep cycle settings from being
changed while the washer is operating. Press and hold the OPTION button for 3 seconds to
activate or deactivate CHILD LOCK. CL will be shown in the display, and all controls are
disabled except the ON/OFF button. The washer can be locked during a cycle.
TUB CLEAN
Remove any clothing or items from the washer and close the door. Open the dispenser drawer
and add liquid chlorine bleach to the bleach compartment.
NOTE : Do not add any detergent to the detergent compartments. Excessive suds may
be produced and leak from the washer.
Close the dispenser drawer slowly. Power on the machine, press the OPTION button and then
select the TUB CLEAN. Press the Start/Pause button to start. After the cycle is complete,
leave the door open to dry around the washer door opening, door seal and door glass.
CAUTION : If there are small children in the house, care must be taken so that they
can not climb into or play inside the washer while it is open for drying.
SPIN SENSE
SPINSENSE can be used when there is a vibration problem, especially on wood floor
installations. To operate SPINSENSE press and hold the WATER PLUS button for 3 seconds
when the washing machine is running on any cycle. When SPINSENSE has been selected,
the SPIN SPEED button light will blink on and off continually to indicate that the SPINSENSE
function has been selected. Push and hold the WATER PLUS button again for 3 seconds to
cancel SPINSENSE. Once SPINSENSE has been selected, if will continue to function even if
interrupted by a power failure. SPINSENSE option cannot be selected during the spinning
cycle.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents