Nisuta ns-wir150ne User Manual page 49

IP Address: Enter the IP address of the PC where
you want to set the applications.
Protocol: Select the protocol (TCP/UDP/Both) for
the application.
Delete/Enable: Click to check it for corresponding
operation.
Well-Known Service Port: Select the well-known
services as DNS, FTP from the drop-down menu to
add to the configured one above.
Add: Add the selected well-known port to the
policy ID.
For example:
The server at IP address of 192.168.1.10 provides WEB
service for port 80 and Telnet service for port 23. If you
want clients in the Internet visit that server, you need to
set it as above.
NOTE:
If you set the virtual server of the service port as 80,
you must set the Web management port on Remote
Web Management page to be any value except 80
such as 8080. Otherwise, there will be a conflict to
disable the virtual server.
NS-WIR150NE_OEM_user_manual_v1.1
44