D-Link di-524up Quick Installation Manual page 7

The Setup Wizard (continued)
If your ISP requires a
Address, and this option is selected,
then this screen will appear:
Enter the IP address information
originally provided to you by your
ISP. You will need to complete all
the required fields.
Click Next
If your ISP uses PPPoE
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear: (Used mainly
for DSL Internet service.)
Enter in the username and password
provided to you by your ISP.
Click Next
Static IP
Please continue to Wireless Setup.
(Point-to-
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Please continue to Wireless Setup.
7