D-Link di-524up Quick Installation Manual page 3

Restart Your Computer
Connecting Additional Computers
To The DI-524UP
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-524UP.
Power LED – a solid
light indicates a proper
connection to the power
supply.
WAN LED – a solid light indicates
connection on the WAN port.
This LED blinks during data
transmission.
When you have completed the steps in this Quick Installation Guide, your connected
network should look similar to this:
Status LED – a
blinking light indicates
that the DI-524UP is
functioning properly.
WLAN LED – a solid light indicates
that the wireless segment is ready.
This LED blinks during wireless data
transmission.
LOCAL NETWORK LEDs – a solid light
on the port indicates a connection to an
Ethernet enabled computer on ports 1-4.
This LED blinks during data transmission.
USB Printer LED
solid light indicates a proper
connection. This LED blinks during
data transmission.