Table of Contents
Advertisement
A
the supply air duct and combustible materials. This is required
for the first 3 feet of ducting.
It is important to insure that the 1/4 inch minimum spacing is
maintained at all points.
Failure to do this could result in overheating the combustible
material and may result in a fire causing damage, injury or death.
Manual 2100-401A
Page
12 of 21
FIGURE 5
ELECTRIC HEAT CLEARANCE
WARNING
minimum of 1/4 inch clearance must be maintained between
SIDE SECTION VIEW OF SUPPLY AIR DUCT FOR WALL
MOUNTED UNIT SHOWING 1/4 INCH CLEARANCE TO
COMBUSTIBLE SURFACES.
Advertisement
Table of Contents
