Table of Contents
Advertisement
14
Operating
Radio Operations
Antenna Connection
Connect the FM wire antenna to FM antenna
connector.
2
1. Press
P/1
repeatedly until FM appears in
the display window. The last received station is
tuned in.
2. Auto tuning : Press
until the frequency indication starts changing,
then release. scanning stops when the unit tunes
in a station.
Manual tuning: Press
3. Adjust the volume by pressing
ND1520-FI.BLVALLK_1781-ENG.indd 14
/
for about 2 seconds
/
repeatedly.
- / + (VOLUME) .
Presetting the Radio Stations
You can preset 10 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
repeatedly until FM appears in the
P/1
display window.
2. Select the desired frequency by using
3. Press and hold
D/Pr
. A preset number will blink
in the display window.
4. Press
/
to select the preset number you
want.
5. Press D/Pr. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press
/
to select a preset station.
,
Note
• If all stations have already been preset,
"FULL" will appear in the display window for
a moment and then a preset number will
blink. To change the preset number, repeat
the steps 4-5.
• You can not delete preset stations.
• Although all stations were preset, you can
preset a station by overwriting the previous
station.
• While listening to radio if you press and
hold D/Pr, a preset number you listened to
lastly will blink first to overwrite the previous
station.
• While listening to a preset station if you
want to change it's preset number at a
same frequency, press and hold D/Pr. And
then change a preset number by pressing
/
.
/
.
D/Pr and then
2012-09-18
4:25:49
Advertisement
Table of Contents
