Table of Contents
Advertisement
,
Note
• If you do not set the clock on your iPod/
iPhone, the unit will not be able to
synchronize the clock with your iPod/
iPhone.
• If you unplug the cord from an outlet, the
clock setting you set won't be stored.
• After setting a clock function, you can set
alarm function.
• If you do not press any button for 30
minutes after the alarm goes off, the alarm
will shut off automatically.
• If you set the clock and alarm, you can
check the time and alarm icon "
pressing ALARM although the unit is stand
by mode.
• If you activate the alarm, the alarm icon "
" will appear in the display window.
• If you deactivate the alarm, the alarm icon
"
" will disappear in the display window.
• Alarm function only works when the unit is
turned off.
• If the time you set is up, the unit will be
turned on automatically.
• After alarm function works, you can turn it
off by pressing ALARM or P/1.
• You can only set 12 : 00 (for an PM display)
Sleep Timer Setting
While listening to music or radio, press SNOOZE/
SLEEP repeatedly to select delay time between 10
and 180 minutes. After delay time, the unit will turn
off. (You can see the following order, 180 -> 150
->120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 -> 30 -> 20
-> 10)
To cancel the sleep function, press SNOOZE/SLEEP
repeatedly until the display window get bright.
,
Note
• You can check the remaining time before
the unit turns off by pressing SNOOZE/
SLEEP.
• Sleep function will work after dimmer
function.
ND1520-FI.BCANLLK_6282-ENG.indd 13
Radio Operations
Antenna Connection
Connect the FM wire antenna to FM antenna
connector.
" by
1. Press
P/1
the display window. The last received station is
tuned in.
2. Auto tuning : Press
until the frequency indication starts changing,
then release. scanning stops when the unit tunes
in a station.
Manual tuning: Press
3. Adjust the volume by pressing
Operating
repeatedly until FM appears in
/
for about 2 seconds
/
repeatedly.
- / + (VOLUME) .
2012-04-20
13
2
6:49:42
Advertisement
Table of Contents
