Devolo Home Control First Steps page 15

If you use screws to attach the Home Control Door/Window Contact, take apart the upper and
lower housing components of the sensor by pressing the tab down
components (from top to bottom,
Take apart the upper and lower housing parts of the magnet, starting at the groove provided for this
purpose at the lower end of the magnet.
If installing to a wall using screws, make sure that no gas, water or power lines in
the wall get damaged. There is a danger of electric shock!
Based on the template on the lower housing component of the sensor, drill holes at the
desired installation location on the window or door, and then attach the lower component using
screws.
and ).
in order to release the housing
15