Devolo Home Control First Steps page 10

10
Register the Home Control Smart Metering Plug at the Home Control Central Unit
Multiple Home Control Smart Metering Plugs must not be plugged into one another.
To ensure the best possible wireless range for the Home Control Smart Metering Plug, avoid po-
sitioning it behind objects that block the signal (attenuation) and avoid interference
sources. Weak signals due to attenuation can result from furniture, plants and especially metal
objects which are located between the devices. Possible sources of interference include electrical
devices such as a microwave or computer. In such instances, keep your device at least around 50
cm away from the source. The device is designed for indoor use only.
The Home Control Smart Metering Plug shuts off automatically if an overload > 3 kW
occurs. To restore function to the Home Control Smart Metering Plug, unplug it for
around 10 seconds, then plug it in again.
Select a wall outlet while taking the above factors into consideration, then lay the
Home Control Smart Metering Plug only near this outlet at first.
If this is the first Home Control device that you are registering, a list of possible devices is displayed auto-
matically when
devolo Home Control Smart Metering Plug. To add a device manually, call up your
Home Control Central Unit
devolo Home Control Smart Metering Plug. Continue to follow the instructions to log into your
Home Control Central Unit.
you register
and select
the Home Control Central Unit.
Devices
Select
Add device