Devolo MT02758 Manual

Siren MT02758
Siren MT02758 is a wireless siren, based on Z-Wave
the Z-Wave TM plus product, it support the security, OTA... Those newest
features of the Z-Wave TM
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
with other Z-Wave TM certified devices from other manufacturers and/or
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
network system is all made by Z-Wave
network system will have the advantages as below.
TM technology. It is
technology. Z-Wave TM is a wireless
TM 500 series chip, when your Z-Wave
TM 500 series devices. The
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
•

Product Overview

Adding to Z-Wave
There are one tamper key and a circle button behind the device. Both
of them can add, remove, reset or association from Z-Wave
TM network
In the first time, add the device into the Z-Wave
sure the primary controller is in the add mode. And then power on the
device. The device will auto start the NWI (Network Wide Inclusion)
mode. And it should be included in 5 seconds. You will see the LED
light ON one second.
TM
Notice: Including a node ID allocated by Z-Wave
1
Circle Button
Siren
Battery
(Optional)
TM Network
DC Jack
Tamper Key
TM network.
TM network. First, make
TM Controller means