Taking care of your machine
IMPORTANT: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Pre-motor filter should be tapped over a bin every 4-6 uses to remove dirt and debris. Do not use your vacuum
cleaner without all of the filters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off.
Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Cleaning the Pre-motor filter
CAUTION: Incorrect fitting of the separator cap will reduce suction.
Lift the dirt bin lid
release clip. In a hinge
like manner lift open
the dirt bin lid.
Hold the dirt container over
a bin. Push down the dirt
release clip at the bottom
of the dirt container.
The dirt release door will
open allowing dirt/debris
to fall out.
Pull the filter tab and
remove the pre-motor filter.
Tap the filter over a bin
to remove any dirt/debris.
Wash the filter under
running water
(40 degrees max).
Don't over fill the
dirt container to
avoid blocking the
air flow through the
vacuum cleaner.
Need help?
Do you have a question about the Dynamo Power Total Home and is the answer not in the manual?