Hide thumbs Also See for Fastback 8x:
Table of Contents
  • Español

  • Français

    • Sommaire
    • Sécurité Et Confort
    • Introduction
    • Première Installation
    • Types de Reliure
    • Reliure D'un Document
      • Reliure Lx-Strips™ Et Lx-Comp Strips
      • Reliure Halfback
      • Reliure Et Remplissage Perfectback
      • Reliure Hardcover
      • Pour Les Utilisateurs de L-Strip
    • Conseils Pour Une Reliure Optimale
    • Menu de L'utilisateur
    • Dépannage
    • Fiche Technique
    • Notification Fcc
    • Avertissement
  • Deutsch

    • Inhaltsverzeichnis
    • Einleitung
    • Ersteinrichtung
    • Bindearten
    • Binden von Dokumenten
      • Binden mit Lx-Strips™ oder Lx-Comp Strips™ 77 B. Binden mit Hardcover™ Umschlägen
      • Binden mit L-Strips
    • Sonderfunktionen
    • Störungen
    • Technische Angaben
    • Wichtige Hinweise
    • Copyright und Garantie

Advertisement

Available languages

Available languages

Quick Links

Information for Your Reference:
Serial Number:
Purchase Date:
Dealer Name:
Dealer Phone:
C O N T E N T S
C O N T E N I D O
S O M M A I R E
I N H A L T S V E R Z E I C H N I S
I
SAFETY & COMFORT . . . . . . . . . . . . . . . . . . . . . 2
II
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . 4
III
FIRST TIME SETUP . . . . . . . . . . . . . . . . . . . . . . . . 5
IV
SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
V
BINDING A DOCUMENT . . . . . . . . . . . . . . . . . . 7
A. Lx-Strips™and Lx–Comp Strips™Binding . . . . . 7
B. Halfback™ Binding . . . . . . . . . . . . . . . . . . . . . . . 8
C. Perfectback®Binding and Padding . . . . . . . . . . . 9
D. Hardcover™Binding . . . . . . . . . . . . . . . . . . . . 13
E. For L-Strip Users . . . . . . . . . . . . . . . . . . . . . . . 14
VI
TIPS FOR BEST BINDING . . . . . . . . . . . . . . . . 15
VII
USER MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VIII
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . 20
IX
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . 22
X
FCC NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
XI
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CONTENIDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SOMMAIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
INHALTSVERZEICHNIS . . . . . . . . . . . . . . . . . 73
FASTBACK MODEL 8x USER'S MANUAL, L4079 Rev. C 04/08/05
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fastback 8x and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Powis Parker Fastback 8x

  • Page 1 C O N T E N T S C O N T E N I D O S O M M A I R E I N H A L T S V E R Z E I C H N I S SAFETY &...
  • Page 2: I Safety & Comfort

    SA FETY & COMFORT Please read through this manual before setting up and using your binder. • Connect all equipment to properly grounded power outlets. • Do not allow anything to rest on the power cord. Do not locate the binder where persons will step on the cord. •...
  • Page 3 SA FETY & COMFORT (co ntinu e d ) In recent years, medical attention on occupational injuries has identified common, seemingly harmless activities as potential causes of a wide range of problems collectively known as Repetitive Stress Injuries or Cumulative Trauma Disorders.
  • Page 4: Ii Introduction

    IN TRODUCT ION Congratulations on the purchase of your new Model 8x binder! Like all our Fastback. binders, this machine was carefully assembled and tested prior to packing. You will find it fast and easy to use. Once the machine is turned on, it only takes about 40 seconds to bind a document.
  • Page 5: Iii First Time Setup

    FIRST T IME SET UP A. What’s Included Inside the Box Fastback. Model 8x Binder Accessory box, which contains: User’s manual Power cord 3 Book support fences Starter kit of covers and Lx-Strips™ Lx-Strip color fan image sheet If any of the preceding items are damaged or missing, contact your dealer immediately.
  • Page 6 A4. Custom lengths can also be provided. Ask your dealer � for details. For the strongest and most professional looking bind, Powis Parker covers should be used. Covers are available in many sizes. Styles include glossy composition covers, clear �...
  • Page 7 BIN DING A DOCUMENT NOTE: If you have a Model 8 binder instead of the 8x, you must only use the WI TH Lx-ST RI PS™, o r original L-strips. Lx-COMP STR IP S™ If necessary, switch to Lx-STRIP or Lx-COMP STRIP mode (see Section VII, page 15).
  • Page 8 BIN DING A DOCUMENT WI TH HA LFB ACK™ C OVE RS If necessary, switch to Halfback mode (see Section VII, page 15). If the machine is already in Halfback mode, the display reads “READY TO BIND” … “HALFBACK”. Select your Halfback cover according to your document thickness: 10 - 100 sheets = Narrow Halfback 101 - 200 sheet = Medium Halfback...
  • Page 9 The following two pages explain the general procedure to make each type of Perfectback® book. For greater ease in positioning and applying the scores to your cover, we recommend using the Powis Parker Scoring Machine (available separately). With the Scoring Machine you can quickly and easily add crisp single or double score lines to your wraparound covers.
  • Page 10 (Figure 19). F I G U R E • The Powis Parker Scoring Machine can do this T i p: quickly and accurately for you. Peel off the thin release paper at the front of your book block (Figure 20).
  • Page 11 Score and fold your cover at the two positions that will represent your spine edges (Figure 25). • The Powis Parker Scoring Machine can do this quickly and Tip: accurately for you. Peel off the thin release paper at the front of your book block F I G U R E (Figure 26).
  • Page 12 BIN DING HAR D C OVE R BOOKS In addition to soft cover binding, with the Model 8x and our Fastback® F I G U R E Hardcover™ Guide you can create professional-quality hard cover books easily and inexpensively — in less than a minute. Our covers are available in a wide range of sizes, colors and finishes.
  • Page 13 NOTE: If you have a Model 8 binder BIN DING A DOCUMENT WIT H instead of the 8x, you must only use the WI TH L-STRIP S™ original L-strips. If necessary, switch to L-STRIP mode (see Section VII, page 15). If the machine is already in L-STRIP mode, the display reads “READY TO BIND”...
  • Page 14 TIPS FOR BEST BINDIN G • Before binding, tap the pages several times to ensure that they are even when the document is in the binding recess. The Lx-Strip edge and document edge should line up. • The grain of the paper should run parallel to the binding edge of the document.
  • Page 15 USER MEN U Activate the USER MENU by pressing the MENU button, which is the middle button. Use the MENU button to shift through the different functions, and the green BIND button to select the desired function (figure 42). BIND button: Selects menu functions MENU button:...
  • Page 16: Vii User Menu

    USER MEN U (co ntinue d) C. Lx-COMP STRIP. (Refer to Page 7 for Lx-Comp Strip binding instructions.) After switching to the Lx-COMP STRIP setting, follow the Lx-Strip procedure to bind in this mode.) The eye-catching executive look of the Lx-Comp Strip offers a high- end appearance, and is designed to match our Comp covers for your special presentations.
  • Page 17 USER MEN U (co ntinue d) H. EDIT MODE The Edit Mode enables removal and insertion of pages in a document previously bound by the Model 8x binder. Select EDIT MODE in the User Menu. The display will read “READY TO EDIT.” Open and flatten your document to the page you wish to remove.
  • Page 18 USER MENU (co ntinu ed) I. SETTINGS SPINE BIND TIME allows the user to increase or decrease the time it takes to bind the spine of a document. The bind can be improved on some difficult-to–bind paper stocks by increasing the Spine Bind Time. COVER BIND TIME allows the user to increase or decrease the time it takes to bind the cover of a document.
  • Page 19 VIII TRO UBLES HOOTI NG - ERR OR MESSA GES • Error Message: “INSERT BOOK” Possible Cause Solution The operator pressed the Bind button without inserting a Place a book into the machine and then press the Bind book into the binding recess. button.
  • Page 20: Viii Troubleshooting

    VIII T ROU BLESHOO TI NG - BI N D QUALIT Y Problems Solution • The spine is not square. • Fold the Lx-Strip into a 90 degree angle. The better you fold the strip the more square the spine will be. •...
  • Page 21 SP E CI F ICATI ONS Power Requirements: 8x: 115V (110-125VAC) 50-60 Hz, 8.4 Amps 8xE: 230V (220-240VAC) 50-60 Hz, 4.2 Amps 8xJ: 100V (90-110VAC) 50-60 Hz, 9.5 Amps Power Consumption: 8x: 950 Watts while binding, 55 Watts standby 8xE: 950 Watts while binding, 55 Watts standby 8xJ: 950 Watts while binding, 55 Watts standby Recommended Operating 15 to 35 degrees (C), 59 to 95 degrees (F)
  • Page 22 (2) this device must accept any interference received, including interference that may cause undesired operation. • Binder does not contain any user serviceable parts. Return unit to an authorized Powis Parker representative for repair or service. POWIS PARKER PART NUMBERS FOR YOUR REFERENCE: L4079 FB8x USER’S MANUAL...
  • Page 23 C OP YR IG H T I NFORMA TI ON This document contains proprietary and confidential information of Powis Parker Incorporated (PPI). Copyright © Powis Parker Incorporated 2004 All Rights Reserved. No part of this document may be photocopied, reproduced in any form, or translated into another language without prior written consent of PPI, except as allowed under the copyright laws.
  • Page 24 FASTBACK MODEL 8x USER’S MANUAL, L4079 Rev. C 04/08/05...
  • Page 25: Table Of Contents

    C O N T E N I D O SEGURIDAD Y CONFORT ....26 INTRODUCCIÓN ......28 AJUSTES INICIALES.
  • Page 26: Seguridad Y Confort

    SEG UR IDAD Y CONFORT Le recomendamos leer completamente este manual antes de configurar y utilizar la encuadernadora. • Conecte todo el equipo a tomas de corriente correctamente cableadas a tierra. • No permita que ningún objeto se apoye sobre el cable eléctrico.
  • Page 27 SEGURIDAD Y CONFORT (continuación) En años recientes, los estudios médicos de las lesiones laborales concluyeron que ciertas actividades comunes y aparentemente inofensivas son causas potenciales de una amplia variedad de problemas, los cuales se denominan colectivamente lesiones por esfuerzos repetitivos o trastornos por trauma acumulativo.
  • Page 28: Introducción

    IN TRODUCC IÓN ¡Felicitaciones por la compra de su nueva encuadernadora Modelo 8x! Al igual que todos nuestros modelos de encuadernadoras Fastback ® , esta unidad fue armada y probada antes de ser embalada. Estamos seguros de que usted descubrirá de inmediato que es rápida y fácil de usar. Una vez que la máquina está...
  • Page 29: Ajustes Iniciales

    AJ USTES INIC IA LE S A. Qué se incluye en la caja Encuadernadora Fastback Modelo 8x Caja de accesorios, que contiene: Manual del usuario Cable eléctrico 3 guías de soporte de libros Kit básico de cubiertas y lomeras Lx-Strip™ Muestrario de colores de lomeras Lx-Strip Si alguno de estos componentes estuviera dañado o no se encontrase en la caja, comuníquese de inmediato con su distribuidor.
  • Page 30: Estilos De Encuadernación

    Si desea más información, consulte a � su distribuidor. Para lograr una encuadernación más firme y profesional, se recomienda utilizar las cubiertas Powis Parker. Las cubiertas se ofrecen en numerosos tamaños. Los diseños incluyen cubiertas para composición satinadas, cubiertas de plástico transparente y cubiertas de papel con o sin ventanas...
  • Page 31: Encuadernación De Documentos

    E N C UA D E RN A C I ÓN DE OBSERVACIÓN: Si usted tiene una Encuadernadora Modelo 8 de la primera DO CU M E N TO S CO N LO ME R A S generación, sólo debe utilizar las lomeras Lx -S TR I P ™...
  • Page 32 ENCUADERNACIÓN DE DOCUMENTOS CON CUBIERTAS CON LOMO HALFBACK™ De ser necesario, cambie al modo Halfback (consulte la sección VII, página 39). Si la encuadernadora ya se encuentra en el modo Halfback, la pantalla mostrará el mensaje “LISTA PARA ENCUADERNAR” … “HALFBACK”...
  • Page 33: Lomeras Perfectback

    ® pliegues a la cubierta con más facilidad, le recomendamos que utilice la Máquina Plegadora Powis Parker (disponible por separado). Con la Máquina Plegadora usted puede rápida y fácilmente añadir nuevos pliegues sencillos o dobles a sus encuadernaciones de lomo envolvente.
  • Page 34 (figura 19). F I G U R A • La Máquina Plegadora Powis Parker puede C on s ejo : realizar esta tarea con rapidez y precisión. Despegue el papel protector delgado adherido al frente del bloque de páginas (figura 20).
  • Page 35 Pliegue y doble la tapa en las dos posiciones que representan los cantos del lomo (figura 25). • La Máquina Plegadora Powis Parker puede realizar esta C on s ejo : tarea con rapidez y precisión. F I G U R A Despegue el papel protector delgado adherido al frente del bloque de páginas (figura 26).
  • Page 36 EN CUADERN A CIÓN DE LIBRO S DE CUBIER TA DURA Además de la encuadernación con tapas blandas, la Encuadernadora F I G U R A Modelo 8x y nuestra “Guía Fastback Hardcover™” le permitirán ® encuadernar libros de tapas duras de calidad profesional, con rapidez y eficiencia, en menos de un minuto.
  • Page 37: Para Usuarios De Lomeras L-Strip

    OBSERVACIÓN: Si usted tiene una ENCUADERNACIÓN DE DOCUMENTOS Encuadernadora Modelo 8 de la primera CON LOMERAS L-STRIP™ generación, sólo debe utilizar las lomeras L-Strip originales. De ser necesario, cambie al modo L-STRIP (consulte la sección VII, página 39). Si la encuadernadora ya se encuentra en el modo L-STRIP, la pantalla mostrará...
  • Page 38: Consejos Para Una Mejor

    CON SEJ OS PA RA UNA MEJOR EN CUADERN A CIÓN • Antes de encuadernar, golpee suavemente las páginas varias veces para alinearlas cuando el documento se encuentre en la bandeja de encuadernación. Los bordes de la lomera Lx-Strip y del documento deben estar alineados.
  • Page 39: Menú Del Usuario

    ME NÚ DEL USUAR IO Active el MENÚ DEL USUARIO presionando el botón MENÚ, ubicado en el centro de la unidad. El botón MENÚ permite recorrer las diferentes funciones, mientras que el botón ENCUADERNAR, de color verde, las selecciona (figura 42). Botón ENCUADERNAR: Selecciona las...
  • Page 40 ME NÚ DEL USUAR IO (con tinu a c i ó n ) C. LOMERA Lx-COMP STRIP™ (para encuadernar con las lomeras Lx-Comp, consulte las instrucciones de la página 31) Una vez que haya seleccionado el modo lomera Lx-Comp Strip (“Lx-COMP STRIP”), siga las instrucciones correspondientes a las lomeras Lx-Strip.
  • Page 41 ME NÚ DEL USUAR IO (con tinu a c i ó n ) G. MODO DE EDICIÓN El Modo de Edición permite quitar y agregar páginas a un documento ya encuadernado con la Encuadernadora Modelo 8x. Seleccione el MODO DE EDICIÓN en el Menú del Usuario.
  • Page 42 ME N Ú DEL USUAR IO (co ntinu a c i ó n ) H. OPCIONES TIEMPO DE ENCUADERNACIÓN DE LOMO: Permite al usuario aumentar o disminuir el tiempo de encuadernación del lomo de un documento. Al usar ciertos tipos de papel difíciles de encuadernar, los resultados de la encuadernación pueden mejorarse aumentando este parámetro.
  • Page 43: Solución De Problemas

    VIII SO LU CIÓN DE P ROBL E MAS – MENSAJ ES DE E RR OR • Mensaje de error: “INSERTAR LIBRO” Causa probable Solución El usuario oprimió el botón Encuadernar sin haber insertado Ponga un libro en la máquina y luego oprima el botón previamente un libro en la bandeja de encuadernación.
  • Page 44 VIII S OL UC IÓ N DE PROB LE M A S – C ALI DA D DE LA ENCUA DE RN A C I Ó N Problemas Solución • El lomo no está en ángulo recto. • Pliegue la lomera Lx-Strip con un ángulo de 90°. Cuanto mejor la pliegue, tanto más recto quedará...
  • Page 45: Especificaciones

    ES P E CI FICAC I ONE S 8x: 115 V (110-125 VCA) 50-60 Hz, 8,4 A Requisitos eléctricos: 8xE: 230 V (220-240 VCA) 50-60 Hz, 4,2 A 8xJ: 100 V (90-110 VCA) 50-60 Hz, 9,5 A 8x: 950 W modo de encuadernación, 55 W en modo de espera Consumo de energía: 8xE: 950 W modo de encuadernación, 55 W en modo de espera 8xJ: 950 W modo de encuadernación, 55 W en modo de espera...
  • Page 46: Aviso De La Fcc

    Esta encuadernadora no contiene ninguna pieza que pueda ser reparada por el usuario. Para reparar o realizar el servicio de la unidad, devuélvala a un representante autorizado de Powis Parker. NÚMEROS DE PIEZA DE POWIS PARKER CON FINES DE REFERENCIA:...
  • Page 47: Garantía

    INF O RMACI ÓN SOB RE LO S D EREC HOS DE REPR ODUC IÓ N Este documento contiene información confidencial y de propiedad de Powis Parker Incorporated (PPI). Copyright © Powis Parker Incorporated 2004 Todos los derechos resevados. Ninguna sección de este documento podrá ser fotocopiada, reproducida en ninguna forma o traducida a otra lengua sin el consentimiento previo y por escrito de de PPI, excepto por lo establecido en las Leyes de Reproducción.
  • Page 48 MANUAL DEL USUARIO DE LA ENCUADERNADORA FASTBACK MODELO 8x, L4079 Rev. C 04/08/05...
  • Page 49: Sommaire

    S O M M A I R E SÉCURITÉ ET CONFORT ....50 INTRODUCTION ......52 PREMIÈRE INSTALLATION .
  • Page 50: Sécurité Et Confort

    SÉC URIT É ET CON FORT Veuillez lire ce manuel avant d’installer et d’utiliser votre relieuse. • Branchez l’appareil à une prise de courant à contact de mise à la terre. • Vérifiez qu’aucun objet n’appuie sur le cordon électrique. Ne placez pas la relieuse dans un endroit où...
  • Page 51 SÉC URIT É ET CON FORT (su ite ) Ces dernières années, l’attention portée par le corps médical aux accidents du travail a permis d’identifier des activités courantes et apparemment sans danger comme étant la cause potentielle de toute une série de problèmes connus sous le nom de «...
  • Page 52: Introduction

    INTRODUCTION Félicitations ! Vous venez d’acquérir la nouvelle relieuse modèle 8x. Comme toutes nos relieuses Fastback , cet appareil a été ® assemblé et testé avec soin avant d’être conditionné. Il est rapide et facile à utiliser. Une fois que la relieuse est mise en marche, il ne faut pas plus de 40 secondes pour relier un document.
  • Page 53: Première Installation

    PR EMIÈRE I NSTA LLATI ON A. Contenu de l’emballage Relieuse Fastback, modèle 8x La boîte des accessoires contient : Le manuel de l’utilisateur 1 cordon d’alimentation 3 supports de livres 1 kit de base de couvertures et des bandes Lx-Strips™ 1 palette illustrée de couleurs Lx-Strip Si l’un de ces éléments est endommagé...
  • Page 54: Types De Reliure

    Adressez-vous à votre revendeur pour obtenir de plus amples informations. Pour réaliser une reliure durable et � de qualité professionnelle, utilisez les couvertures Powis Parker. De nombreuses tailles de couverture sont disponibles ainsi que divers styles : papier brillant, plastique transparent et papier avec Pages Dernière de...
  • Page 55: Reliure D'un Document

    RE LIURE D’ UN DOCUMENT REMARQUE : si vous avez une relieuse modèle 8 de la première génération, AVE C Lx -STRIP S ™ , o u vous devez utiliser uniquement les Lx-COMP STR IP S ™ bandes L-strip originales. Passez si nécessaire en mode Lx-STRIP ou Lx-COMP STRIP (voir la section VII, page 63).
  • Page 56: Reliure Halfback

    RELIURE D’UN DOCUMENT AVEC LES COUVERTURES HALFBACK Passez si nécessaire en mode Halfback (voir la section VII, page 63). Si la machine est déjà en mode Halfback, le message « READY TO BIND » … « HALFBACK » (PRÊT À RELIER … HALFBACK) apparaît. Sélectionnez votre couverture Halfback en fonction de l’épaisseur de votre document : 10 à...
  • Page 57: Reliure Et Remplissage Perfectback

    . Pour un positionnement et une application de stries plus facile sur votre couverture, nous recommandons l’utilisation de la machine à strier Powis Parker (vendue séparément). Avec la machine à strier, vous pouvez ajouter facilement et rapidement une ligne nette ou des doubles lignes striées sur le dos de la couverture de vos reliures.
  • Page 58 Striez la couverture plus pliez-la au niveau des deux positions qui représenteront les bordures du dos (figure 19). • la machine à strier Powis Parker Conseil pratique : peut le faire rapidement et avec précision. F I G U R E Détachez le papier intercalaire fin à...
  • Page 59 Striez la couverture plus pliez-la au niveau des deux points qui représenteront les bords du dos (figure 25). • la machine à strier Powis Parker peut le faire Conseil pratique : rapidement et avec précision. F I G U R E Détachez le papier intercalaire fin à...
  • Page 60: Reliure Hardcover

    RE LIURE DE LI VRE S À C OUVERTURE CARTONNÉE Le modèle 8x et notre guide Fastback Hardcover™ ne vous permettent ® F I G U R E pas seulement de relier des livres brochés. Vous pouvez également créer des livres à couvertures cartonnées de qualité professionnelle, facilement et à...
  • Page 61: Pour Les Utilisateurs De L-Strip

    REMARQUE : si vous avez une relieuse RE LIURE D’ UN DOCUMENT modèle 8 de la première génération, AVE C L-ST RI PS™ vous devez utiliser uniquement les bandes L-strip originales. Passez si nécessaire en mode L-STRIP (voir la section VII, page 63).
  • Page 62: Conseils Pour Une Reliure Optimale

    CON SEI LS POUR UNE RE LIURE OP TIMALE • Avant de commencer la reliure, tapotez plusieurs fois les pages contre la table pour vous assurer qu’elles seront correctement alignées lors du processus de reliure. Le coin de la bande Lx-Strip et le coin du document doivent correspondre.
  • Page 63: Menu De L'utilisateur

    ME NU DE L’ UTI LISA TEUR Activez le MENU DE L’UTILISATEUR en appuyant sur le bouton MENU (bouton du milieu). Il permet de basculer entre les différentes fonctions, tandis que le bouton vert RELIER permet de sélectionner les options souhaitées (figure 42). Bouton RELIER : permet de sélectionner les différentes options...
  • Page 64 ME NU DE L’ UTI LISA TEUR (su i te ) C. Bande Lx-COMP STRIP™ (Reportez-vous à la page 55 pour trouver des instructions relatives à la reliure dans ce mode.) Après avoir sélectionné le réglage Lx-COMP STRIP, suivez la procédure correspondant aux bandes Lx-Strip pour relier dans ce mode.
  • Page 65 ME NU DE L’ UTI LISA TEUR (su i te ) G. MODE EDIT (ÉDITION) Le mode Édition vous permet de retirer et d’insérer des pages à l’intérieur d’un document déjà relié avec la relieuse modèle Sélectionnez le MODE ÉDITION dans le menu de l’utilisateur.
  • Page 66 ME N U DE L’ UTI LISATE UR (su i te ) H. PARAMÈTRES DURÉE DU PROCESSUS DE RELIURE DE LA BANDE LATÉRALE : permet à l’utilisateur d’augmenter ou de réduire le temps de reliure de la bande latérale d’un document. On peut améliorer la qualité de la reliure avec certains supports de papier difficiles à...
  • Page 67: Dépannage

    VIII DÉ PA NNAGE – MES SA G ES D’ERR EUR • Message d’erreur : « INSERT BOOK » (INSÉREZ LE LIVRE) Cause possible Solution L’utilisateur a appuyé sur le bouton RELIER sans insérer de Placez un livre dans la machine avant d’appuyer sur le livre dans la zone de reliure.
  • Page 68 VIII DÉ P ANNAGE – QUAL I TÉ DE LA RE LIURE Problèmes Solution • Le dos n’est pas carré. • Pliez la bande Lx-Strip à un angle de 90º. Le dos sera d’autant plus carré que vous aurez bien plié la bande. •...
  • Page 69: Fiche Technique

    F IC H E TECHN IQ UE 8x : 115V (110-125VAC) 50-60 Hz, 8,4 ampères Spécifications en matière 8xE : 230V (220-240VAC) 50-60 Hz, 4,2 ampères d’alimentation : 8xJ : 100V (90-110VAC) 50-60 Hz, 9,5 ampères 8x : 950 watts en cours de reliure, 55 watts en position de veille Consommation énergétique : 8xE : 950 watts en cours de reliure, 55 watts en position de veille...
  • Page 70: Notification Fcc

    NO T IF ICAT I ON FCC • Toute modification apportée au produit, sauf autorisation expresse de Powis Parker, est susceptible d’annuler les droits de l’utilisateur quant à l’utilisation de l’équipement. Remarque : cet appareil a fait l’objet de contrôles et été déclaré conforme aux limites applicables à un appareil numérique de classe B, conformément à...
  • Page 71: Avertissement

    INFORMATIONS CONCERNANT LES DROITS D’AUTEUR Ce document contient des informations confidentielles appartenant à Powis Parker Incorporated (PPI). © Powis Parker Incorporated 2004 Tous droits réservés Aucune partie de ce document ne peut être photocopiée, reproduite sous quelque forme que ce soit ou traduite dans d’auteur.
  • Page 72 MANUEL DE L’UTILISATEUR DE LA RELIEUSE FASTBACK MODÈLE 8x, L4079 Rév. C 08/04/05...
  • Page 73: Inhaltsverzeichnis

    I N H A L T S V E R Z E I C H N I S EINLEITUNG ......74 ERSTEINRICHTUNG .
  • Page 74: Einleitung

    EIN LE ITUN G Lernen Sie Ihr neues Bindegerät Modell 8xE kennen! Wie alle FASTBACK-Bindegeräte ist auch dieses Gerät schnell und einfach zu bedienen. Nach dem Einschalten des Bindegerätes dauert das Binden eines Dokumentes nur etwa 40 Sekunden. Mit nur einem Tastendruck können Sie fest gebundene, professionell aussehende Dokumente erstellen.
  • Page 75: Ersteinrichtung

    ER STEI N RI CHTUN G A. INHALT DES VERSANDKARTONS Bindegerät FASTBACK® Modell 8xE Zubehörkarton mit folgendem Inhalt: Bedienungsanleitung Netzkabel Drei Kunststoff-Kühlgitter Starter-Kit mit Einbanddeckeln und Lx-Strips™ Lx-Strip™-Farbfächer Sollte eines der oben aufgeführten Teile fehlen oder beschädigt sein, wenden Sie sich bitte sofort Ihr Fastback Vertreter. B.
  • Page 76: Bindearten

    BIN DEA RTEN Einbanddeckel Ihr FASTBACK-Bindegerät unterstützt vier verschiedene � Dokumentenseiten Bindearten. Bei jeder Bindeart wird eine bestimmte Lx-Strip™ Ausführung von Lx-Strips™ oder Buchdeckeln als Ver- brauchsmaterial benötigt. Die vier verwendeten Arten von Verbrauchsmaterialien sind: � A. Lx-Strips oder Lx-Comp (siehe Abbildung 3)) Lx-Strip™...
  • Page 77: Binden Von Dokumenten

    BI N DE N V ON D OK UM E N T E N HINWEIS: Sie können auch die Kurzanleitung zur Hilfe nehmen, die sich auf der Unterseite des M I T Lx -S T R I P S™ , ode r Binde-gerätes nach vorne herausziehen lässt.
  • Page 78: Binden Mit Lx-Strips™ Oder Lx-Comp Strips™ 77 B. Binden Mit Hardcover™ Umschlägen

    BINDEN VON DOKUMENTEN MIT HARDCOVER® UMSCHLÄGEN Zusätzlich zu den normalen Buchdeckeln können Sie nun mit dem AB B ILDUN G Bindegerät Modell 8xE und dem Hardcover™ Bindepult in kürzester Zeit professionell gebundene und kostengünstige Hardcover™ Bindungen vornehmen. Unsere Hardcover Buchdeckel sind in vielen Farben und Materialien lieferbar.
  • Page 79: Binden Mit L-Strips

    HINWEIS: Sie können auch die Kurz-anleitung BI N DE N V ON D OK UM E N T E N M I T zur Hilfe nehmen, die sich auf der Unterseite L-S T R I P S™ des Bindegerätes nach vorne herausziehen lässt. Falls erforderlich, wechseln Sie in den L-Strip™...
  • Page 80 TIPPS FÜR BE STE E RGE BNISS E BE I M BIN DEN • Klopfen Sie vor dem Binden die Seiten des Dokumentes mehrere Male leicht auf, um sicherzustellen, dass alle Seiten bündig miteinander abschließen, wenn das Dokument in die Bindeöffnung gestellt wird.
  • Page 81: Sonderfunktionen

    SON DE RFUN KTIONEN Drücken Sie die Menütaste (es ist die mittlere Bedientaste), um das Menü aufzurufen. Anschließend können Sie mit der Menütaste zwischen den verschiedenen Menüoptionen wechseln und mit der grünen Bindetaste die gewünschte Menüoption auswählen (siehe Abbildung 42). BINDETASTE: Auswählen der Menüoptionen...
  • Page 82 USER MEN U (co ntinue d) C. Lx-COMP STRIP. Nachdem Sie die Lx-Comp Strip™ Einstellung gewählt haben, folgen Sie den Angaben zur Bindung von Lx-Strips™, um in diesem Modus zu binden.. D. HALFBACK. Diese Bindeart steht zur Zeit nicht zur Verfügung. E.
  • Page 83 SONDERFUNKTIONEN (Fortsetzung) H. EDITIERUNG Mit der Menüoption EDITIERUNG (Bearbeitungsmodus) können Sie Seiten aus einem Dokument entfernen, das zuvor Òmit dem FASTBACK-Bindegerät gebunden wurde, und diesem Dokument auch Seiten hinzufügen. Wählen Sie im Menü die Option EDITIERUNG aus. In der Anzeige erscheint die Meldung “READY TO EDIT” (Bindebereit) Öffnen Sie das Dokument und breiten Sie es flach auf der Seite aus, die Sie entfernen möchten.
  • Page 84 SONDERFUNKTION EN (For ts e tz u n g ) I. EINSTELLUNGEN BINDEZEIT RÜCKEN: Mit der Einstelloption BINDEZEIT RÜCKEN können Sie die Zeitspanne verlängern oder verkürzen, während der Rücken eines Dokumentes gebunden wird. COVER BIND TIME: Mit der Einstelloption BINDEZEIT COVER (Buchdeckel-bindezeit) können Sie die Zeitspanne verlängern oder verkürzen, während die Buchdeckel eines Dokumentes gebun-den werden...
  • Page 85: Störungen

    VIII ST Ö RUNGEN - Feh le rme ldun gen u nd de re n Behe bu ng • Fehlermeldung: “BUCH EINLEGEN” Mögliche Gründe Lösungen Der Bediener hat den Bindeknopf betätigt, ohne das Dokument in Stellen Sie Ihr Dokument in das Bindegerät und betätigen den das Bindegerät zu stellen.
  • Page 86 VIII S T ÖRU NGEN - Prob l eme h in s icht lich de r B indequ alität Problem Lösungen • Der Buchrücken ist nicht winklig. • Knicken Sie den Lx-Strip™ in einem 90° Winkel. Umso besser Sie den Binderücken falten, umso winkeliger ist Ihr Buchrücken. •...
  • Page 87: Technische Angaben

    TE C HNISC HE AN GABE N Netzanschluss: 8x: 115V (110-125VAC) 50-60 Hz, 8,4 Amps 8xE: 230V (220-240VAC) 50-60 Hz, 4,2 Amps 8xJ: 100V (90-110VAC) 50-60 Hz, 9,5 Amps Leistungsaufnahme: Betrieb: 950 Watts Stand by: 55 Watts Empfohlene 15 bis 35 Grad (c), 59 bis 95 Grad (f) Betriebstemperatur und FeuchtigkeitscStrecke: 5 bis 80%-relative Feuchtigkeit kondensationsfrei Feuchtigkeit:...
  • Page 88: Wichtige Hinweise

    W I CH TIGE H IN WEI S E • Durch jede Veränderung oder Modifikation des Geräts, die nicht ausdrücklich von Powis Parker Incorporated oder FORMATIC genehmigt wurde, kann der Betreiber die Erlaubnis für den Betrieb des Gerätes verlieren. HINWEIS: Dieses Gerät wurde geprüft und hält die Grenzwerte eines Digitalgerätes der Class B nach den FCC-Richtlinien Part 15 ein.
  • Page 89: Copyright Und Garantie

    C O P Y RIG H T I NF OR MA TI ON E N Dieses Dokument enthält eigene und vertrauliche Informationen von Powis Parker Incorporated (PPI) Copyright ® Powis Parker Incorporated 2004 / FORMATIC GmbH 2004 (deutsche Version)Alle Rechte vorbehalten.
  • Page 90 FASTBACK MODELL 8x BEDIENUNGSANLEITUNG, L4079 Rev. C 04/08/05...

Table of Contents