Safety Precautions - Faber Varda Installation And Operating Instructions Manual

EN EN

3. SAFETY PRECAUTIONS

- Have the stove installed by a qualified installer in accordance
with local and national (fire safety) regulations.
- Ensure that all packaging items are removed (read any warning
labels carefully).
- Retain all packaging untill installation is complete.
- The heater must be used on an ~ 230V supply and the
voltage marked on the heater must correspond with the supply
voltage.
- Warning: This appliance must be earthed.
- When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electricalshock,
and injury to persons, including the following:
- If the appliance is damaged, check immediatly with the
supplier before installation and operation.
- Do not use outdoors.
- Do not use in the immediate surroundings of a bath, shower
or swimming pool.
- Do not locate the heater immediatly below a fixed socket
outlet or connection box.
- Do not cover the heater. Do not place material or garments on
the heater, or obstruct the air circulation around the heater,
for instance by curtains or furnitue, as this could cause
overheating and a fire risk.
4
- Do not leave young children unsupervised in the vicinity of the
heater.
- Do not use this heater in series with a thermal control, a
programme controller, a timer or any other device that
switches or the heater automatically, since a fire risk exists
when the heater is accidentally covered or displaced.
- Ensure that furniture, curtains or other combustible material
are positioned no closer than 1 metre from the heater.
- In the event of a fault unplug the heater.
- Although the heater complies with safety standards, we do not
recommend it's use on deep pile carpets or on long hair type
of rugs.
- The appliance must be positioned so that the plug is
accessible.
EN
5