VARDA and NARVIK are designed to be inset in a fireplace opening. IVAR, ALMA and OTHELLO are designed to be free standing and are normally positioned against a wall.
3. SAFETY PRECAUTIONS - Have the stove installed by a qualified installer in accordance - Do not leave young children unsupervised in the vicinity of the with local and national (fire safety) regulations. heater. - Ensure that all packaging items are removed (read any warning - Do not use this heater in series with a thermal control, a labels carefully).
Connect the fire to your electricity supply. fig. 11 Consult the installation instructions for the installation of the stove. The Varda and Narvik are supplied with two OTHELLO brackets on both sides at the bottom. The controls are located on the top canopy Remove the ‘M8’...
Both settings have thermostat temperature control. In order to operate the heating, switch L must be in the 'ON' VARDA/NARVIK/OTHELLO position (see fig. 13). The thermostat regulates the heat output according to user needs.
6.2 LAMP REPLACEMENT upwards and remove. Remove the fuel assembly by lifting slightly and sliding out. VARDA/NARVIK Unscrew the defective lamp anti-clockwise. To gain acces to the lamps open the Ashpan Replace with a 230 V, 40 W E14 SES lamp, do flap.