A/V Output Setting - Topfield TF5100PVRc User Manual

MENU OPERATIONS

A/V Output Setting

The PVR has many A/V Outputs. Control this menu properly according to external
components connected to the PVR. Configurations concerning Audio and Video can be
made here.
A. TV Type
Select your TV standard. For automatic PAL /NTSC selection, set it to PAL .
B. Video Output
Select the mode of Video output among RGB , S-Video, YUV and CVBS on TV SCART
by using , buttons.
C. VCR SCART Type
Select the VCR SCART type either Standard or External A/V . In case of External A/V ,
the source of TV SCART Output will be selected between VCR SCART input and
internal AV by pressing button on the RCU. In case of Standard , it will be done
automatically by the SCART functionality.
D. TV Aspect Ratio
Select your TV screen format. Select 4:3 or 16:9 mode by using , buttons.
E. 16:9 Display Format
If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can
select the display format. Select the Letter Box or Center extract by using ,
buttons.
F. Sound Mode
It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right
mode by using , buttons. The Sound mode is configurable later on by using
,
button on your RCU.
G. RF Type
When the PVR is connected to the TV by an RF cable, you may need to select the
correct TV standard system. Select the PAL G , PAL I , PAL K, NTSC-M mode by using
, buttons.
H. RF Channel
22