Connection To The Broadcasting Cable - Topfield TF5100PVRc User Manual

INSTALLATION (Connection)
4) Connection to the TV using the RF cable.
Connect an broadcasting cable or RF LOOP
2 OUT to RF IN socket on the PVR.
Connect one end of the RF cable to the RF
OUT socket on the PVR.
Connect the other end to the ANT IN socket
on the TV.
* The output signal from RF LOOP 2 OUT
can be weak because the signal is
decreased in the tuners. If the signal is too
weak, use broadcasting cable instead of RF
LOOP 2 OUT.
5) Connection to the TV using the S-VIDEO.
Connect one end of the S-VIDEO cable to
the S-VIDEO socket on the PVR and the
other end to a S-VIDEO socket on the TV.

Connection to the Broadcasting Cable.

Connect the broadcasting cable to the
CABLE 1 IN and connect the RF LOOP 1
OUT to CABLE 2 IN.
* The signal from antenna can become
weak at second tuner if connected from RF
LOOP 1 OUT to CABLE 2 IN.
Separate broadcasting cables for each tuner
are recommended if the signal level of
cascaded tuner is too weak.
BROADCASTING CABLE
CABLE 1 CABLE 2
RF LOOP 1 OUT RF LOOP 1 OUT
BROADCASTING CABLE
CABLE 1 CABLE 2
RF LOOP 1 OUT RF LOOP 1 OUT
CABLE
CABLE 1 CABLE 2
RF LOOP 1 OUT RF LOOP 1 OUT
14