PSC vs1200 Quick Start Programming Manual page 36

RS-232 COMMUNICATION MODE
RS-232 I
The programming bar codes in this section pertain
only to POS terminals with an RS-232 communica-
tion interface. In order for the POS terminal and
scanner to communicate, the scanner's configuration
must match the communication settings of the POS
terminal. The scanner's factory default configura-
tion has been preset to 9600, 8, N, 1.
RS-232 Interface communication options are:
• Baud Rate
• Parity
• Data Bits
• Stop Bits
• End of Message Character
•Timeout Between Characters
• ACK/NAK Protocol
• Xon/Xoff Protocol
NOTE: The RS-232 interface must first be selected on page 34 before
you can set the RS-232 options in this section.
32
V S/HS/Duet Universal-Wedge Quick Start Guide
NTERFACE
C
ONFIGURATION