NEC XL-3500 User Manual page 35

Sync System
This function is used to select the detection method of the sync
signal for an RGB signal.
Use the CURSOR or
or "TRI-SYNC" and press ENTER.
• When "AUTO" is selected, the sync type will be displayed.
• Select "AUTO" in normal operation.
On-screen display
• AUTO --------- Detects automatically a composite or HV
separate sync signal.
• G-SYNC ------ Selects sync on green signal.
• TRI-SYNC ---- Selects a tri-sync signal (HDTV signal).
Sync Termination
This functions is used to select the impedance of the sync signal.
Use the CURSOR or
then press ENTER.
NOTE: The default setting is "75 ".
This should be "75 " for normal use. Select the "Hi-Z" when
inputting a TTL signal.
Display Mode
This function is used to select the image display mode such as
VGA, SVGA or Mac.
Use the CURSOR or
press the ENTER button.
Color Matrix
This function is used to select the mode to match the output
format of an HDTV or DVD signal.
Use the CURSOR or
and press the ENTER button.
CTI(Color Transient Improvement) Control
This functions is used to turn this feature on so you can make the
color sharper.
Use the CURSOR or
press the ENTER button.
button to select "AUTO", "G-SYNC",
button to select " 75 " or "Hi-Z",
button to select the desired mode and
button to select the appropriate mode
button to select either On or Off and
35
3.OPERATION