Table of Contents
Advertisement
DSL-504T DSL Router User's Guide
Test
This window is used to test connectivity of the Router. A Ping test may be done through the local or
external interface to test connectivity to known IP addresses. The diagnostics feature executes a series of
test of your system software and hardware connections. Use this window when working with your ISP to
troubleshoot problems.
Diagnostic Test menu
Select the Virtual Circuit and click the test button. A message will appear informing you if the loop test
succeeded or failed.
The diagnostics utility will run a series of test to check whether the device's connections are up and
working. This takes only a few seconds. The program reports whether the test passed or failed. A test
may be skipped if the program determines that no suitable interface is configured on which to run the
test.
91
Advertisement
Table of Contents
