Table of Contents
Advertisement
The PVC pull-down menu offers eight virtual connections available for configuration. The default VC used
by the Router is labeled Pvc0. Any additional connections that are configured must have a VPI/VCI
combination that is unique to the Router. These numbers will have been already been established by your
service provider on their network.
To add a new virtual connection:
1. Select the new PVC to configure from the pull-down menu.
2. Enter the values for the VPI and VCI given to you by your service provider.
3. To activate the VC, select Enabled from the Virtual Circuit pull-down menu.
4. Configure the WAN Settings and Connection Type as desired.
In the example below, a new VC (Pvc1) has been added using the WAN Settings window. The connection
is setup as a bridged connection.
The new VC appears can be configured separately in other windows such as Static Routing.
DSL-504T DSL Router User's Guide
Configure new VC example
55
Advertisement
Table of Contents
