LENCO CS-472 Instruction Manual page 6

1.5 Wires Connection Description
The Description of the Wires Connection
1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other end of the
Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen maybe flashes.
The Description of the Wires Connection of the Wiring Connecting Socket 1
NOTICE:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact with any ground connection.
3. Some cars have special wires connection(the Memory and the ACC connection have changed), if so,
Please connect MEMORY a to ACC b and ACC b to MEMORY b.
Reinforce connection
The Description of the Wires Connection of the Wiring Connecting Socket 2
Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car
5