NEC MultiSync MT830 User Manual page 30

Image Adjustment
Menu
Provides access to controls for your image and sound. Use the "Select" button on the projector cabinet
or ( ) ( ) buttons on your remote control to highlight the menu for the item you want to adjust.
The volume, image mode, keystone, brightness, contrast, color, tint and sharpness controls are available
for Video or S-Video sources.
The volume, image mode, keystone, brightness, contrast, white balance and auto mode controls are
available for RGB 1 or RGB 2 sources.
The volume, image mode and keystone controls are available for PC CARD.
Volume
Use the Mouse pad (+) or (–) buttons to adjust the volume.
Image Mode
VIDEO/S-VIDEO ........ Use the Mouse pad (+) or (-) buttons to choose "Normal" for a regular picture,
"Natural" for true color reproduction, or "Document Camera" for a document
camera or other low APL picture.
RGB/ PC CARD ..... Use the Mouse pad (+) or (-) buttons to choose "Normal" when in a lighted
room and "Natural 1&2" when in a darkened room. 1 for better flesh tone; 2 for
true reproduction of middle tones.
Keystone
Use the Mouse pad (+) or (-) buttons to correct the keystone (trapezoidal) distortion to make the top
of the screen longer or shorter to be the same as the bottom.
NOTE: The maximum keystone angle that can be corrected is 23 degrees, including the optical offset
8 degrees.
NOTE: To save your keystone changes, select "Keystone Save" from the Power Menu.
Brightness
Use the Mouse pad (+) or (–) buttons to adjust the brightness.
Contrast
Use the Mouse pad (+) or (–) buttons to adjust the contrast.
Color
Use the Mouse pad (+) or (–) buttons to adjust the color.
Tint
Use the Mouse pad (+) or (–) buttons to adjust the tint.
Sharpness
Use the Mouse pad (+) or (–) buttons to adjust the sharpness.
E-29