NEC MultiSync MT830 User Manual page 14

Nec lcd projector user's manual
Hide thumbs Also See for MultiSync MT830:
Table of Contents

Advertisement

19 Slide Button
Press (+) to advance the next file or slide and (-) to return to
the previous file or slide. (the optional MT Viewer board
required)
20 Magnify Button
Use the (+) or (-) button to adjust the image size up to 400%.
When the Pointer is displayed, the magnified image is dis-
played at the center of the Pointer.
When the Pointer is not displayed, the magnified image is
displayed at the center of the screen.
21 Keystone Button
Press the (+) or (-) button to correct the keystone (trapezoi-
dal) distortion, and make the image square.
22 Focus Button
Press the (+) or (-) button to adjust the focus.
23 Zoom Button
Press the (+) button to zoom in and the (-) button to zoom
out.
24 Remote Jack
Connect your remote control cable here for wired operation.
NOTE: You cannot use Menu and Pointer at the same time.
Remote Control Precautions
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
• When the cable is connected to the remote control, it will not
work in the wireless mode.
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time,
remove the batteries.
• Do not mix new and old or different types of batteries.
VIDEO
MENU
20
23
E-13
OFF
ON
POWER
S-VIDEO
PC CARD
RGB 1
RGB 2
LASER
+
R-CLICK/CANCEL
POINTER
PIC-MUTE FREEZE
MAGNIFY
SLIDE VOLUME
+
+
+
ZOOM
FOCUS KEYSTONE
+
+
+
19
21
22
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync mt1030

Table of Contents