Operation Instructions - better homes BG1755B Assembly Manual

OPERATING INSTRUCTIONS
L.P. GAS INSTALLATION
Gas grills that are set to operate with L.P. gas come with a high capacity hose and regulator assembly.
(Note: Only use the pressure regulator and hose assembly supplied with the grill or a
replacement pressure regulator and hose assembly specified by the manufacturer). This
assembly is designed to connect directly to a standard 20 lb. L.P. cylinder. L.P. cylinders are not
included with the grill. L.P. cylinders can be purchased separately at an independent dealer.
Connecting a Liquid Propane Gas Tank to the Grill:
Fig. 1
1. Open the doors of the cabinet. Turn the
stopper of the tank tray (counter-clockwise). Place
a 20 Ib. tank with foot ring into the tank tray.
See Fig. 1.
Make sure the tank valve is in the
OFF position.
Fig. 2
2. Tighten the retention screw in front
of the tank tray to secure the tank.
Push the tank tray to the end and lock
it by turning the stopper back
(clockwise). See Fig. 2.
3. Check the tank valve to ensure it has proper external mating threads to fit the hose and
regulator assembly provided (Type 1 connection per ANSI Z21.58b-2002).
4. Inspect the valve connection port of the regulator assembly. Look for damage or debris.
Remove any debris. Inspect hose for damage. Never use damaged or plugged equipment.
5.Make sure all burner knobs are in the OFF position.
21