Table of Contents
Advertisement
SYSTEM RESET
DAB is a terrestrial system and frequencies in different areas
vary. If you move the radio to another part of the country
performing a scan may not be enough to re program the
radio so you may need to reset the radio.
To restore factory settings:
•
Press and hold the
MENU button.
' A UTOSCAN' will flash on the display.
•
Press the
TUN+ or TUN- button repeatedly until 'FACTORY'
appears on the display.
•
Press the
SELECT/NAV button.
'RESET' will flash on the display.
SELECT/NAV button to confirm reset.
•
Press the
After reset all settings are returned to the factory defaults and
any stored presets are erased.
SOFTWARE VERSION
You can display the version of software in your radio. This
may be used by a service engineer if there is a problem with
your radio.
To display the software version:
•
Press and
hold the MENU button until the display
changes to show 'AUTOSCAN' .
•
Press the
TUN+ or TUN- button repeatedly until
'VERSION' appears on the display.
•
Press the
SELECT/NAV button.
The software version will be displayed.
TROUBLESHOOTING
No power
•
Check that the AC adaptor is connected correctly and
mains power is switched on.
Poor reception
•
Check the signal strength (page 6). If the signal strength
is low, try adjusting the position of the aerial. If this
doesn't help, move the radio to a position where the
signal strength is better.
Alarm not sounding
•
Check that the alarm(s) have been set correctly.
•
If you have set DAB or FM presets to wake you, check that
the alarm volume is set loiud enough.
DAB reception problems after moving area
•
The station list will need updating. Try scanning the
band. If there are still problems with all or part of the
station list, reset the radio.
CARE AND MAINTENANCE
AFTER USING YOUR RADIO
•
Set to Standby.
•
Switch the unit off at the mains and unplug it if you are
leaving it unattended for a long period (holidays etc).
CARE AND CLEANING
All care and cleaning operations should be carried out with
the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster. Never
clean the unit with liquids or solvents.
9
SPECIFICATIONS
Supply Voltage : ....................... 5 V
, 1 A
AC adaptor supply voltage: ...... 100-240V~, 50/60Hz, 0.18A
DAB tuning range: .................... 174 -240 MHz
FM tuning range: ..................... 87.5-108 MHz
Net Weight: .............................. 0.35 kg
Class II construction double insulated.
This product must not be connected to earth.
WARRANTY
Your Tesco appliance is covered by a warranty for 12 months
from the date of purchase. If a fault develops during this
period, please contact the TESCO electrical help line on 0845
456 6767. Please have your original purchase receipt with
you when you call. This warranty in no way affects your
consumer rights.
UK: Waste electrical products /batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your
nearest facilities. See www.recycle-more.co.uk
or in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Hide quick links:
Advertisement
Table of Contents
