Do you have a question about the DAB-109CR and is the answer not in the manual?
Questions and answers
John Kenneth Kelsey Trinder
February 19, 2025
station tuning
1 comments:
Mr. Anderson
February 19, 2025
To tune stations on the Technika DAB-109CR:
1. For DAB Stations: - Press and hold the AUTOTUNE button to start tuning. - The display will show ‘Preset’ and a flashing digit indicating the preset number. - Use the JOG MODE/SELECT button to choose a station. - To store a station, press the PRESETS button. - To select a different preset number, turn the VOLUME/SELECT control and press PRESET to store. - If Auto Enter mode is enabled, the station is stored automatically.
2. For Manual FM Tuning: - Press the JOG MODE/SELECT button to enter manual FM tuning mode. - The display will show . - Turn the VOLUME/SELECT control to manually tune up or down.
The radio supports Band III (174-230 MHz) for DAB and 87.5-108 MHz for FM.
Digital picture frame clock radio with ipod dock (24 pages)
Summary of Contents for Technika DAB-109CR
Page 1
User Guide DAB-109CR DAB Digital Radio alarm clock...
Page 3
IMPORTANT SAFETY INFORMATION IMPORTANT Refer all servicing to qualified service personnel. CAUTION! Servicing is required when the apparatus has been This equipment generates, uses and can radiate radio RISK OF ELECTRIC SHOCK damaged in any way, such as the power-supply cord frequency energy and, if not installed and used in DO NOT OPEN or plug is damaged, liquid has been spilled or objects...
The carton should contain: Station tuning ............6 countries in Europe, including the UK use Band III (174-230 • The DAB-109CR DAB Digital radio alarm clock FM reception ............6 MHz); others, France for example, use the L-Band (1452- • Operating Manual 1492 MHz).
CONTROLS TOP VIEW a Autotune button b Presets button c Info button d DAB/FM button e Snooze button f Standby/On button g Sleep button h Alarm 2 button i Alarm 1 button 1) Speaker...
CONTROLS AND CONNECTORS SIDE VIEW BACK VIEW a Volume/Select control a DAB/FM aerial wire b Jog Mode/Select button b AC power cord DISPLAY FEATURES Time display Alarm 1 Symbol NOTE: If both alarms are set, the Alarm 1 and Alarm 2 symbols will flash alternately.
POWER CONTROL GETTING STARTED ADJUSTING THE VOLUME CONNECTING POWER DAB/FM AERIAL To increase the volume: • Check that the mains voltage marked on the rating plate Before using your radio for DAB or FM reception, unwrap • Rotate the VOLUME/SELECT control wheel toward the on the underside of the unit is the same as the voltage and fully extend the aerial wire.
SELECTING A DAB STATION FM RECEPTION STATION PRESETS The stations are stored in an alphanumeric list. Your radio can also receive FM band radio stations. DAB and FM presets To select another station To change to the FM band Your radio can store up to 10 of your favourite stations as •...
ALARM FUNCTIONS Your radio includes a dual alarm function. The two alarms, The display will now show the legend ‘FM’ . If either of the alarms have been set to wake you, the ALARM ALARM 1 and ALARM 2 can be set with different wake-up •...
SLEEP MODE SCANNING MANUAL TUNING THE SLEEP FUNCTION When first used, your radio scanned the DAB band for If preferred, you can also tune DAB stations manually. The Sleep function allows you to program your radio to available stations. The station services found were then To Manually tune: switch itself off after a set period of 90, 80, 70, 60, 30 or 10 stored in your radio’s memory.
DISPLAY MODES DAB DISPLAY MODES DLS (SCROLLING TEXT): This is a scrolling message giving When playing a DAB station you can change the information real-time information - song titles, news headlines, etc. on the display by changing the display mode. SIGNAL STRENGTH: This bargraph indicates the quality of To change the display mode from the default of the signal being received.
SYSTEM RESET SOFTWARE VERSION SPECIFICATIONS DAB is a terrestrial system and frequencies in different areas You can display the version of software used in your radio. SPECIFICATIONS vary. If you move the radio to another part of the country This will only be necessary as an aid for technicians should Supply Voltage : ....220-240 V~, 50Hz performing a Full Scan may not be enough to re program the your radio ever need service.
Need help?
Do you have a question about the DAB-109CR and is the answer not in the manual?
Questions and answers
station tuning
To tune stations on the Technika DAB-109CR:
.
1. For DAB Stations:
- Press and hold the AUTOTUNE button to start tuning.
- The display will show ‘Preset’ and a flashing digit indicating the preset number.
- Use the JOG MODE/SELECT button to choose a station.
- To store a station, press the PRESETS button.
- To select a different preset number, turn the VOLUME/SELECT control and press PRESET to store.
- If Auto Enter mode is enabled, the station is stored automatically.
2. For Manual FM Tuning:
- Press the JOG MODE/SELECT button to enter manual FM tuning mode.
- The display will show
- Turn the VOLUME/SELECT control to manually tune up or down.
The radio supports Band III (174-230 MHz) for DAB and 87.5-108 MHz for FM.
This answer is automatically generated