Sleep Mode; Scanning; Manual Tuning - Technika DCR1301 Owner's Handbook Manual

SLEEP MODE

The Sleep function allows you to program your radio to
switch off automatically after a set period between 5 and 90
minutes.
To activate the Sleep function:
• Press the SNOOZE button.
The display will show 'SLEEPOFF' .
TUN+ button repeatedly until your required
• Press the
sleep time appears on the display.
• Press SELECT/NAV to set this sleep time.
The Snooze/Sleep indicator will be displayed.
Snooze/Sleep indicator
22:42
Z
Z
DAB
Your radio will continue to play, then will set to Standby
when the sleep time expires.
To check the Sleep time remaining:
• Press the SNOOZE button during Sleep mode.
The remaining sleep time will be displayed.
To cancel Sleep mode:
• Press the SNOOZE button during Sleep mode.
• Press the TUN+ or TUN- button repeatedly until
'SLEEPOFF' appears on the display.
SELECT/NAV to confirm.
• Press
Sleep mode will be cancelled.

SCANNING

When first used, your radio scanned the DAB band for
available stations. The station services found were then
stored in your radio's memory.
You can re-scan the band at any time if you move to a different
area or just to refresh the stored list of available stations.
TO START A SCAN
• Switch on the radio and select the DAB band.
• Press and hold the MENU button.
' A UTOSCAN' will flash on the display.
• Press the SELECT/NAV button.
The scanning display will be shown while the scan takes place.
The display shows scan progress, also the number of stations
found.
0:00
DAB
>>>>>
Scan progress
8

MANUAL TUNING

If preferred, you can also tune directly to a DAB multiplex to
check signal strength.
NOTE: Manual tuning is recommended for experienced users
only.
To Manually tune:
• Press and hold the
' A UTOSCAN' will flash on the display.
• Press the
'MANUAL' appears on the display.
• Press the TUN+ or TUN- button repeatedly to step
through the multiplex channel numbers.
• Press the SELECT/NAV button to tune to the channel
displayed.
If this multiplex is broadcast in your area, the signal strength
will be displayed and the first station in the multiplex will
play.
• Repeat the last two steps to tune to a different
multiplex.
33 • To exit Manual Tuning, press the
Stations found
MENU button.
TUN+ or TUN- button repeatedly until
MENU button.