NEC LT280 User Manual page 30

(B) Example of wireless LAN connection
(Network Type Mode: Infrastructure)
Wireless LAN card
(Optional)
To make connection with a wired LAN via an access point, you need to select the Infrastructure mode.
From the menu, select [Setup]
[Mode] [Infrastructure].
(C) Example of wireless LAN connection (Network Type
To enable direct communication (i.e., peer-to-peer) between personal computers and projectors, you need to
select the 802.11 Ad Hoc mode.
From the menu, select [Setup]
[Mode] [802.11 Ad Hoc].
The 802.11 Ad Hoc mode complies with IEEE802.11 standard.
When in Ad Hoc mode, only 802.11b is available for communication method.
Data transmission speed in Ad Hoc mode is limited up to 11Mbps.
PC with wireless
LAN card inserted
Access
Point
[Installation]
Wireless LAN card
(Optional)
PC with wireless
LAN card inserted
[Installation]
PC with built-in wireless
LAN function
Wired LAN
[LAN Mode] [PC Card]
Mode: 802.11 Ad Hoc)
[LAN Mode] [PC Card]
20
2. Installation and Connections
[Advanced]
PC with built-in wireless
LAN function
[Advanced]
[Network Type]
[Network Type]