Using On-Screen Menu; Using The Menus - NEC LT280 User Manual

6. Using On-Screen Menu

Using the Menus

1. Press the MENU button on the remote control or the projector cabinet to display the menu.
Submenu
NOTE: The commands such as
2. Press the SELECT
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first
tab.
4. Use the SELECT
adjust or set.
You can use the SELECT
want.
NOTE: You can select a tab only when the tab color is orange.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjust the level or turn the selected item on or off by using the SELECT
control or the projector cabinet.
Changes are stored until you adjust it again.
7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the
projector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
, ENTER, EXIT in the gray bar show available buttons for your operation.
buttons on the remote control or the projector cabinet to display the submenu.
buttons on the remote control or the projector cabinet to select the item you want to
buttons on the remote control or the projector cabinet to select the tab you
62
Submenu window
Main menu
Currently available
buttons
buttons on the remote