Connecting The Supplied Power Cable - NEC LT280 User Manual

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.
First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cable in the wall outlet.
To wall outlet
Make sure that the prongs are fully
inserted into both the AC IN and the
wall outlet.
CAUTION:
Do not unplug the power cable from the wall outlet under any one of the following circumstances.
Doing so can cause damage to the projector or PC card:
• While the projector's lamp is lighted.
• While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is
turned off.
• While the PC CARD Access Indicator lights. Doing so can damage your PC memory card.
U S
P C
B
C A
R D
C O
M P
O N
E N L A
T IN N
S -V Y
ID E
O IN
C b
V ID /P b
E O
IN A U
D IO C O
C r/ M P
P r IN
U T
E R
L /M A U
3 IN
O N D IO
C O
O IN
M P
U T
E R
R
1 IN
A U
D IO
O U
T
C O
M O
M P
N IT U T
O R E R
O U 2 IN
T
P C
C O
N T
R O
L
A C
I N
23
2. Installation and Connections