Troubleshooting - Fujitsu LIFEBOOK S762 User Manual

User Settings
The User Settings tab has three interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow users
to customize OmniPass to suit their individual preferences. Under User Settings (Audio Settings and Taskbar Tips)
you can set how OmniPass notifies the user of OmniPass events (e.g., successful login, access denied, etc.). The
details of each setting under the Audio Settings and Taskbar Tips interfaces are self-explanatory.
The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll and authentication device refer
Chapter 2.3
to . To enroll additional fingerprints, click Enroll Authentication Device, and authenticate with OmniPass.
Select the fingerprint recognition device in the Select Authentication Device screen (it should already be marked by
a green check if you have a finger enrolled) and click Next.
System Settings
The OmniPass Startup Options interface can be found in the System Settings tab. With these options you can specify
how your OmniPass Logon is tied to your Windows Logon.
The first option, Automatically log on to OmniPass as the current user, will do just as it says; during Windows login,
you will be logged on to OmniPass using your Windows login credentials. If the user logging into Windows was never
enrolled into OmniPass, upon login no one will be logged on to OmniPass. This setting is appropriate for an office
setting or any setting where users must enter a username and password to log into a computer. This is the default
setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login once you have
logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in User from the
right-click menu.

Troubleshooting

You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need
administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the
same username and password
177 - Introducing the Optional Fingerprint Sensor Device