Downloading Driver Updates - Fujitsu LIFEBOOK S762 User Manual

WARNING: Reverting back to UEFI mode will require a hard drive reformat. All data and personal settings will be lost.
It is highly recommended that you back up your data before you revert back to UEFI mode.
For further information please refer to our support pages:
To access the BIOS Setup, press the [F2] key after switching the system on.
1
Use the right/left arrow keys to switch to the Security page.
2
* If your system doesn't have Supervisor Password, you cannot change the Secure Boot Configurations.
In this case you need to select Set Supervisor Password and set the password.
Use the up/down arrow keys to select Secure Boot Configurations.
3
Select Secure Boot or Secure Boot Option and using the [Enter] key set it to [Disabled] for 32-bit and to
4
[Enabled] for 64-bit, then use the [ESC] key to exit Secure Boot Configurations.
Use the arrow keys to switch to the Advanced page.
5
Select CSM and set it to [Enabled] for 32-bit and [Disabled] for 64-bit.
6
Select the Fast Boot and set it to [Enable] for 32-bit and [Disabled] for 64-bit.
7
Use the arrow keys to switch to the Exit page.
8
Exit the BIOS Setup via Exit Saving Changes.
9

Downloading Driver Updates

The Fujitsu Software Download Manager (FSDM) utility is available to allow you to download the latest drivers,
utilities, and applications from the Fujitsu Support site. If you have a Windows 8 or Windows 7 operating system, you
will need to go to the Support Site (http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS).
http://www.fujitsu.com/us/support/
117 - Restoring Your System Image and Software (Windows 8)